Rivet Shelving Installation - Easy Steps to Install Your Own Room Organizing Pieces

broken image

If you are in the market for some new storage equipment, you may want to take a look at the benefits of rivet shelving. These are not like the typical open shelving options that you might be familiar with. Instead of being attached to walls with screws and nails, these shelves will actually be mounted on casters so that they can easily be moved around. What's more, there is typically an area on the inside of the shelf that will be riveted to the studs in the wall. This is a very efficient design that will save you a lot of space, even during a building remodel.

To get started with the installation, it's important to know that you will probably have to do a bit of cutting. You will basically want to cut out the inner portion of the shelf, which will allow you to mount the wheels securely and easily. Once this is done, you should then install the side pieces, which will provide support for the entire shelf. After this is all done, you will be ready to install the other two sides of the shelving.

The first thing that you need to do before your rivet shelving installation begins is make sure that all of the shelves are lined up. In most cases, you will want to center the wheels within their braces. While this may sound difficult, it is actually very easy to do. Just center the wheels so that they are perpendicular to the wall. This will allow you to simply pull the shelves up or down to their proper positions.

After you have all of the pieces positioned correctly, it's time to start putting them together. Before you begin, it would be best if you test each piece out first. This way, you can ensure that they are strong enough to hold all of the other pieces. To do this, simply place each piece on the floor and then try to lift it up and down. If it doesn't sit properly, then it is probably not strong enough to hold everything else.

Once you have the pieces installed, you will be ready to install the brackets. You will need to work in small areas at first, until you get a feel for how everything works. It would be a good idea to practice at home with a few pieces of wood. This way, when you install the final piece, it will go together well. Once you have installed everything, then you can move to larger areas. Click here to discover more about these services.

When you are finished, make sure to take a look at your new shelving installation. You should be able to identify any problems with any piece. It would also be a great idea to practice installing it at home, in case there are any glitches you don't know about yet. This way, once the whole thing is installed, you won't have to worry about any adjustments. Your shelves should be working just fine in no time!